PICOTE SOLUTION

The Coating Pump delivers the resin to the inside of the pipe and as the Mini Miller shaft rotates this in turn rotates the brushes that spread the resin over the inner pipe wall. The coating operation is started at the end of the pipe farthest from the access point. Resin is then pumped into the pipe and brushed on to the wall. The coating is then checked by pushing the brushes back to starting point and checking with the camera. This is repeated over the length of the pipe being lined until the brush assembly reaches the access point. Subsequent layers can be coated in two to four hour intervals, unless hot air is applied to speed up the process to less than one hour between layers. Various coats are recommended depending on the pipe diameter or intended application.